使用Tina-SDK编译构建系统

cat tina-v853-open.tar.gz*| tar zx

book@100ask:~/tina-v853-open$ ls
brandy  build  buildroot  build.sh  device  kernel  openwrt  platform  prebuilt  README.md  target  tools

book@100ask:~$ git clone  https://github.com/DongshanPI/Yzukilizard-v851s-TinaSDK
book@100ask:~$ cp -rfvd  Yuzukilizard-v851s-TinaSDK/* tina-v853-open/

 sudo apt-get install -y  libncurses5-dev   u-boot-tools

book@100ask:~/tina-v853$ source build/envsetup.sh 

You're building on Linux

Lunch menu... pick a combo:
     1  v851s-lizard-tina
     2  v853-vision-tina
Which would you like?: 1 #输入数字1 选择v851s-lizard-tina
Jump to longan autoconfig
/home/book/workspace/tina-v853/build.sh autoconfig -o openwrt -i v851s -b lizard        -n default 

Before using this files, please make sure that you note the following important information.
**********************************************************************

Copyright (c) 2019-2022 Allwinner Technology Co., Ltd. ALL rights reserved.

Allwinner is a trademark of Allwinner Technology Co.,Ltd., registered in
the the People's Republic of China and other countries.
All Allwinner Technology Co.,Ltd. trademarks are used with permission.

DISCLAIMER
THIRD PARTY LICENCES MAY BE REQUIRED TO IMPLEMENT THE SOLUTION/PRODUCT.
IF YOU NEED TO INTEGRATE THIRD PARTY'S TECHNOLOGY (SONY, DTS, DOLBY, AVS OR MPEGLA, ETC.)
IN ALLWINNERS'SDK OR PRODUCTS, YOU SHALL BE SOLELY RESPONSIBLE TO OBTAIN
ALL APPROPRIATELY REQUIRED THIRD PARTY LICENCES.
ALLWINNER SHALL HAVE NO WARRANTY, INDEMNITY OR OTHER OBLIGATIONS WITH RESPECT TO MATTERS
COVERED UNDER ANY REQUIRED THIRD PARTY LICENSE.
YOU ARE SOLELY RESPONSIBLE FOR YOUR USAGE OF THIRD PARTY'S TECHNOLOGY.


THIS SOFTWARE IS PROVIDED BY ALLWINNER"AS IS" AND TO THE MAXIMUM EXTENT
PERMITTED BY LAW, ALLWINNER EXPRESSLY DISCLAIMS ALL WARRANTIES OF ANY KIND,
WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION REGARDING
THE TITLE, NON-INFRINGEMENT, ACCURACY, CONDITION, COMPLETENESS, PERFORMANCE
OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT SHALL ALLWINNER BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS, OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGE.

**********************************************************************
You can read /home/book/workspace/tina-v853/build/disclaimer/Allwinnertech_Disclaimer(Cn_En)_20181122.md for detailed information. 

You read time left 8 seconds....
I have already read, understood and accepted the above terms? [Y/N]y #输入y
You select Yes, Build continue....
========ACTION List: mk_autoconfig -o openwrt -i v851s -b lizard -n default;========
options : 
INFO: Prepare toolchain ...
INFO: kernel defconfig: generate /home/book/workspace/tina-v853/kernel/linux-4.9/.config by /home/book/workspace/tina-v853/device/config/chips/v851s/configs/lizard/linux-4.9/config-4.9
INFO: Prepare toolchain ...
make: Entering directory '/home/book/workspace/tina-v853/kernel/linux-4.9'
  HOSTCC  scripts/basic/fixdep
  HOSTCC  scripts/kconfig/conf.o
  SHIPPED scripts/kconfig/zconf.tab.c
  SHIPPED scripts/kconfig/zconf.lex.c
  SHIPPED scripts/kconfig/zconf.hash.c
  HOSTCC  scripts/kconfig/zconf.tab.o
  HOSTLD  scripts/kconfig/conf
*** Default configuration is based on '../../../../../device/config/chips/v851s/configs/lizard/linux-4.9/config-4.9'
#
# configuration written to .config
#
make: Leaving directory '/home/book/workspace/tina-v853/kernel/linux-4.9'
INFO: clean buildserver

Usage:
 kill [options] <pid> [...]

Options:
 <pid> [...]            send signal to every <pid> listed
 -<signal>, -s, --signal <signal>
                        specify the <signal> to be sent
 -l, --list=[<signal>]  list all signal names, or convert one to a name
 -L, --table            list all signal names in a nice table

 -h, --help     display this help and exit
 -V, --version  output version information and exit

For more details see kill(1).
INFO: prepare_buildserver
book@100ask:~/tina-v853$ make
...
book@100ask:~/tina-v853$ pack
...